Manually Adding a Provisioning Server to a Polycom Phone
- Press the Home button
- Select “Settings” button from the main menu.
- Select “Advanced…”
- Enter the admin password for the phone. If the password is unknown, then a factory reset will be necessary to reset it to the default 456.
- Select “Administration Settings…”
- Select “Network Configuration…”
- Select “Provisioning Server…”
- Select “Server Type:” and choose “HTTPS”.
- Select “Server Address:”
- For the West server input, visit the West User Portal; for East server input, visit the East User Portal.
- Select “Back”.
- Select “Back”.
- Select “Save Config”.
- The phone should reboot.
Please Note: The rest of the settings should be left as they are.
If you have any additional questions about your Polycom phones from RingSquared, please contact the RingSquared support team or call 800-427-Ring.
Connecting a new IP phone? This guide walks you through setting up your new phone and connecting it to RingSquared.
